Back to Blog
Repairs 18 November 2026 8 min read

MacBook Screen Lines Horizontal: What They Mean and How to Fix Them (2026)

Horizontal lines across a MacBook screen almost always point to a fault between the logic board and the display, not a software problem. The usual culprits are a damaged display flex cable, a failing .

Device giving trouble? If you have a MacBook issue, you do not have to read the full guide. Message us on WhatsApp for a fixed quote, or see our MacBook Repair page.

WhatsApp for a Quote

Why does my MacBook screen have horizontal lines?

The image you see is built row by row. The logic board sends a video signal down a flex cable, a driver circuit converts it for the panel, and the panel's own electronics light each row of pixels. A horizontal line means one or more rows are not being driven correctly, and the fault can sit at any point in that chain.

In our Hyde Park workshop we see four main causes:

  • Damaged display flex cable. On many MacBook Air and Pro models the cable runs through the hinge area and is flexed every time the lid opens. Over years the copper traces fatigue, and intermittent lines appear that change as you move the lid.
  • Failed display panel. Thin bright or dark lines that never move, sometimes spreading from one edge, suggest the panel's internal driver or a cracked layer. This is common after the laptop has been pressed in a bag.
  • Logic board or graphics fault. Coloured stripes, flickering bands or a screen that fills with lines during heavy use often trace back to the GPU or its supporting circuitry. Certain 2011 to 2013 and 2015 15-inch MacBook Pro machines are well known for this.
  • Liquid or corrosion damage. Moisture inside the machine can corrode connectors and board traces. If you have had a spill, see our notes on liquid damage before you do anything else.
  • How can I tell if it's the screen or the logic board?

    This is the single most useful test, and you can do it at home in two minutes. Press Command + Shift + 3 to take a screenshot, then open the saved image. If the lines are not in the screenshot, the macOS display output is clean, which points to the panel, the flex cable or the display driver electronics. If the lines are in the screenshot, the fault is upstream, in the graphics system on the logic board.

    A second test is an external monitor. Connect the MacBook to a TV or monitor over HDMI or USB-C. If the external image is perfect, the Mac's graphics are working and the internal display chain is at fault. If the external image shows the same lines, the board is the problem.

    Third, gently open and close the lid slowly while watching the lines. If they flicker, shift or disappear at certain angles, the flex cable is almost certainly failing. Be gentle: forcing the hinge can turn a cable fault into a panel fault.

    What can I safely try at home?

    There are a few low-risk steps worth trying before you book anything:

  • Restart and reset. Shut the Mac down fully, wait ten seconds and start it again. On Intel models, resetting the SMC and NVRAM is detailed on Apple Support, and it occasionally clears display glitches caused by firmware confusion.
  • Boot into Safe Mode. This disables third-party extensions and clears some caches. If the lines vanish in Safe Mode, a software conflict is the cause.
  • Update macOS. Graphics driver bugs do occur, and an update can resolve them.
  • Run Apple Diagnostics. Hold D at startup on Intel Macs, or hold the power button on Apple silicon until startup options appear, then follow the prompts. A display or GPU reference code is a useful clue.
  • What we strongly advise against: pressing hard on the screen, bending the lid, or applying heat with a hairdryer. We have seen a fixable cable fault become a cracked panel because someone tried to "reseat" it by squeezing the bezel. Do not open the machine unless you are comfortable with fine-pitch connectors.

    Is it worth repairing, or should I replace the whole MacBook?

    Often the answer is repair, and by a wide margin. A new Mac costs far more than most display or board-level repairs, a fraction of the cost of a new Mac in many cases, and your data, settings and software stay exactly as you left them. Replacement makes more sense only when the machine is very old and several components are failing at once, or when the damage is so extensive that parts and labour exceed the machine's real value.

    The decision usually depends on what is actually broken. A flex cable fault is a small, targeted repair. A failed panel means replacing the display assembly. A GPU fault needs board-level work. Without a proper diagnosis you are guessing, which is why we start with one.

    What does the repair process look like in your workshop?

    When a MacBook arrives, we follow the same order every time. First we reproduce the fault and run the screenshot and external display tests described above, so we know which side of the signal chain we are dealing with. Then we open the machine, inspect the flex cable and connectors under magnification, and check for corrosion, bent pins or heat marks.

    If the fault is in the cable or panel, we replace the display assembly or cable and test across temperature and lid angles. You can read more about this on our screen repair page. If the fault is on the board, the work moves to the microsoldering bench: we measure power rails, check the display and graphics circuitry, and replace the failed component. Our logic board repair service covers this in detail.

    Having repaired over 12,000 MacBooks since 2009, we have learned that the cheapest repair is the correct one done first. Replacing a screen when the board is at fault wastes money and time, so we confirm before we recommend. A diagnostic assessment starts from R899 excluding VAT for Mac computers, and we give you a clear finding before any repair begins.

    When does a screen fault need board-level repair?

    Board-level work is needed when the lines persist in screenshots, when an external monitor shows the same fault, or when a new panel does not cure it. Signs include lines that appear only when the Mac warms up, coloured vertical and horizontal bands together, a screen that flashes before going black, or a machine that has also had a spill or a power surge.

    Johannesburg adds its own pressures here. Load shedding and the surges that come back with the power can stress charging and display power circuits, and Highveld dust works into fans and vents, driving temperatures up and accelerating GPU solder failures. If your Mac has been through repeated hard power cuts, mention it when you book, because it narrows the diagnosis. If the machine is also showing battery or charging problems, our battery replacement page explains how those symptoms overlap.

    Before any board-level work, we always advise backing up. If the machine is unstable or the display is unreadable, we can handle data recovery first so your files are safe whatever happens next.

    How do I get my MacBook looked at?

    You can WhatsApp us on 064 529 5863 with a photo or short video of the lines and your MacBook model, and we will tell you what we suspect. To lock in a time, book online at zasupport.com/book. You can also reach us through our contact page, and our wider MacBook repair page lists the other faults we handle.

    Frequently Asked Questions

    Can horizontal lines on a MacBook screen go away on their own?

    Occasionally, if the cause is a software glitch or a temporary graphics hiccup, a restart or macOS update clears them. If the lines are hardware-related, such as a cable or panel fault, they tend to return and usually worsen over time. Treat recurring lines as a warning to back up your data.

    Are horizontal lines a sign my MacBook is about to die completely?

    Not necessarily, but they should not be ignored. A failing flex cable or panel can be repaired without affecting the rest of the machine. A graphics or board fault can progress to a black screen or a Mac that will not start, so earlier diagnosis is safer.

    Will a liquid spill cause horizontal lines?

    Yes, it can. Moisture corrodes connectors and board traces, and the display circuitry is a common casualty. Switch the Mac off immediately, do not charge it, and bring it in as soon as you can.

    Can I use my MacBook with an external monitor if the screen has lines?

    Often yes, and it is a handy stopgap. If the external display works cleanly, the Mac itself is still functioning and the fault is confined to the internal display chain. It is still worth getting it checked.

    Does a cracked screen cause horizontal lines?

    Frequently. Impact damage to the panel can produce lines, patches or bleeding colour, even if the glass looks intact. Pressure from a bag or a closed lid with debris on the keyboard can have the same effect.

    How long does a display repair usually take?

    It depends on the fault and parts availability. Cable and display assembly replacements are usually quicker than board-level work, which needs careful testing on the microsoldering bench. We confirm the likely timeframe once the diagnosis is complete.

    Indicative pricing only. Final pricing is confirmed once ZA Support verifies your device model and serial number.

    Pricing is confirmed on assessment and depends on your specific device. Contact ZA Support on 064 529 5863 with your model and serial number for a confirmed quote.

    Warranty terms depend on the product. The standard is a three-month warranty on all products, extendable three months as standard, extendable up to 12 months depending on the product.

    Warranty terms can change from one product to another. Your final warranty is confirmed only in writing or once ZA Support has verified your product and request.

    Processing and lead times are indicative only and depend entirely on your specific machine.

    The repair process and turnaround time change based on the model, the fault, and the parts your device needs. You will only have a confirmed lead time after you enquire and speak to a ZA Support consultant who assesses your machine. Contact us on 064 529 5863.

    Standard diagnostics start from four business hours. Need faster attention? Select the rush diagnostic option for immediate diagnostic commencement. Repair work starts from four business hours onward, while completion time depends on the fault's complexity, parts requirements, approval and testing.

    Courtney Bentley, CEO & Apple Certified Expert Consultant at ZA Support

    Written by

    Courtney Bentley

    CEO & Apple Certified Expert Consultant

    Former Apple South Africa Manager (2007-2009). Founded ZA Support at age 19 in 2009. Forbes Africa 30 Under 30 (2019). Co-founder of Vizibiliti Insight Africa (2016). Has overseen ZA Support's 25,000+ Mac repair operations at the Hyde Park workshop. Specialises in component-level logic board repair, liquid damage recovery, and medical practice IT. UNISA Artificial Intelligence / Cognitive Computing (2017-ongoing). Member of the Apple Developer Program.

    View all articles by Courtney โ†’

    Need a repair? Assessment: R899 for laptops and desktops, R599 for iPhone, iPad and Apple Watch, excluding VAT.

    Hyde Park, Johannesburg. Same-day diagnostics available.