Why does the power button work when the rest of the keyboard does not?
On every modern MacBook, the keyboard is a grid of switches read by a controller. On the older models, that controller sits on the logic board. On the 2016 to 2019 butterfly-keyboard machines, the keys connect through a flex cable that runs under the logic board and the battery.
The power button is different. On non-Touch Bar models it is a single switch with its own small connection. On Touch ID models, the button sits on its own flex or at the end of the Touch Bar assembly. Because it does not depend on the key matrix, it can still tell the Mac to wake or shut down while every other key stays silent.
This is why the symptom is such a useful diagnostic clue. It tells us the Mac is alive, macOS is probably running and the fault sits in the path between the keys and the processor.
Is it a software problem or a hardware fault?
Always rule out software first, because it costs nothing. Restart the Mac using the power button, then try the keyboard again at the login screen. If keys work at the login screen but not once you are logged in, you are looking at software, a rogue login item or a corrupted preference.
Next, check Accessibility settings. Sticky Keys, Slow Keys and Keyboard Viewer can all make a keyboard seem dead. Apple documents these in its Apple Support pages and they are worth five minutes of your time.
Finally, try an external USB or Bluetooth keyboard. If the external one works but the built-in keyboard does not, the Mac is healthy and the fault is in the internal keyboard path. If neither works, or macOS itself is behaving strangely, we start looking at the logic board.
What usually causes a MacBook keyboard to stop responding?
From the work that passes through our bench, the most common causes are these:
Liquid exposure. Even a small spill can leave sugar or mineral residue that bridges contacts on the keyboard flex or the logic board connector. Sometimes the Mac works for weeks before corrosion finally cuts the connection. If you suspect a past spill, read our page on liquid damage repair, because the quicker it is treated, the better the outcome.
A damaged keyboard flex cable. On butterfly-keyboard models the flex is thin and sits in a cramped spot. Repeated lid opening, heat and a swollen battery pressing upward can all damage it.
A swollen battery. This one surprises people. A battery that has expanded can push against the keyboard and trackpad, flex the cables and cause intermittent or total keyboard failure. If your trackpad is also hard to click, treat this as urgent and see our battery replacement service.
Power surges. Johannesburg load shedding and the surge when power returns are hard on charging circuits. A surge can damage components that support the keyboard controller, although this is less common than the causes above.
Logic board faults. A failed keyboard controller, a damaged connector pad or a shorted line on the board will kill the keyboard no matter how good the keyboard assembly is.
What can I safely try at home?
There are a few things worth trying before you bring the Mac in, and none of them involve opening the machine.
What we strongly advise against: prising off keycaps on a butterfly keyboard, pouring isopropyl alcohol into the keyboard, or opening the case to reseat cables if you have never done it. We regularly see keyboards that were fixable until a well-meaning attempt snapped a ribbon connector or tore a flex.
If the Mac has had liquid in it, switch it off and keep it off. Do not keep testing it. Every power-up with residue on the board risks burning a trace.
How do you diagnose this in the workshop?
Our diagnostic assessment starts with the basics and then goes deeper. We confirm the symptom, test with an external keyboard and check whether the problem is consistent or intermittent. Then we open the Mac and look for the signs that matter: battery swelling, liquid indicators, corrosion around the keyboard connector, flex damage and heat discolouration.
After that we move to measurement. Using a multimeter and a thermal camera, we check the power rails that feed the keyboard circuitry, test the connector pins for continuity and look for shorted lines. A thermal camera is particularly useful because a shorted component heats up while everything around it stays cool, which saves hours of guesswork. We have worked on well over 12,000 MacBooks since 2009, and the pattern recognition that comes from that volume is real: a certain symptom on a certain board revision often points straight to the likely fault.
A diagnostic assessment starts from R899 excluding VAT for Mac computers, and it gives you a clear answer on what is wrong before any repair work begins.
When does board-level repair beat replacing the keyboard?
This is where independent repair makes the biggest difference. A common approach is to replace the whole top case, which includes the keyboard, trackpad and battery on many models, and hope the problem goes away. If the actual fault is on the logic board, the new top case does nothing, and you have paid for a part you did not need.
Board-level repair makes sense when:
In those cases we repair the fault at component level: replacing a damaged connector, a failed driver chip or a burnt supporting component under the microscope. Our logic board repair service covers this, and a repair of this kind costs a fraction of the cost of a new Mac, which matters when the machine holds years of work. If you are not sure which route fits your Mac, our general MacBook repair page explains the options.
If the fault does turn out to be the keyboard assembly itself, we say so and replace only that. We would rather tell you the truth than sell you a board repair you do not need.
Will I lose my data?
Usually not. A dead keyboard does not mean a dead drive, and in most cases your data is untouched. If the Mac will not start or you are worried before any repair, tell us at the outset and we can protect your files first. Our data recovery service exists for exactly this situation.
What should I do next?
If your MacBook keyboard stopped working except for the power button, try the safe steps above, then stop before you reach for a screwdriver. If the problem persists, get it properly diagnosed.
You can WhatsApp us on 064 529 5863 with your model and a short description, or book online at zasupport.com/book to bring it to our Hyde Park workshop. For other ways to reach us, see our contact page.
Frequently Asked Questions
Why does only the power button work on my MacBook?
The power button has its own separate connection and does not rely on the key matrix. When the keyboard flex, controller or board section fails, the power button can keep working while everything else goes silent.
Can a software update fix a dead MacBook keyboard?
Occasionally, yes, if the cause is a software bug or a corrupted setting. If the keyboard is also dead at the login screen or in Safe Mode, the fault is hardware and an update will not help.
Is a swollen battery really able to stop the keyboard working?
Yes. An expanded battery pushes against the keyboard and trackpad and can strain the flex cables. If your trackpad is lifting or hard to click, stop using the Mac and have the battery checked promptly.
Can I use an external keyboard while I wait for a repair?
Yes, in most cases a USB or Bluetooth keyboard will work fine. It is also a good diagnostic test, because it confirms whether the Mac itself is healthy.
Does a spilled drink always mean the logic board is damaged?
Not always, but liquid can cause corrosion that develops slowly, so a Mac that seemed fine after a spill can fail weeks later. The sooner it is cleaned and inspected, the better the chance of a simple fix.
How long does a keyboard fault repair take?
It depends on the cause. A straightforward keyboard or flex replacement is quicker than a board-level repair, which needs careful testing under the microscope. After the diagnostic assessment we can give you a realistic timeframe for your Mac.
